stainless steel pipe schedule 5 pressure rating | stainless steel pipe schedule 5 dimensions | stainless steel pipe schedule 5 weight
  • stainless steel pipe schedule 5 pressure rating | stainless steel pipe schedule 5 dimensions | stainless steel pipe schedule 5 weight | SS Pipe Dimensions | Wall Thickness | Tolerances | Properties
  • stainless steel pipe schedule 5 pressure rating | stainless steel pipe schedule 5 dimensions | stainless steel pipe schedule 5 weight

    stainless steel pipe schedule 5 pressure rating | stainless steel pipe schedule 5 dimensions | stainless steel pipe schedule 5 weight | Learn More About SS Pipe Dimensions | Sizes in OD & Inches | Pressure Rating | Schedule, Wall Thickness & Weight | tolerances | properties

    stainless steel pipe schedule 40, stainless steel pipe schedule 80, stainless steel pipe schedule 5, stainless steel pipe schedule 10, stainless steel pipe dimensions, stainless steel pipe pressure rating, stainless steel pipe chart, stainless steel pipe price, stainless steel pipe weight calculator, stainless steel pipe weight formula

    stainless steel pipe schedule chart metric, Stainless Steel Pipes Dimension (Schedule, Wall Thickness & Weight), Stainless Steel Pipe -Type 304 Schedule 40S , ss 304 pipe weight per meter, Stainless Steel Pipe Dimension in mm & weight per kg., Stainless Austenitic Steel Tubes, Stainless Steel Chemical Composition and mechanical properties, ss 304 square pipe weight chart


    DOWNLOAD PDF :: SS Chemical Mechanical Properties | ANSI ASME 36.19M Stainless Steel Pipe | SS Chemical Mechanical Properties | Stainless Steel Pipes Dimension | Stainless Steel Pipes Sizes

    stainless steel pipe schedule 5 pressure rating | stainless steel pipe schedule 5 dimensions | stainless steel pipe schedule 5 weight

    0.5" NOM. (0.84" OD X 0.07" WALL X 0.71" ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (.5") is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.59 pounds
    Dimension Name Value
    Nominal 0.5"
    OD 0.84"
    Wall Thickness 0.07"
    ID 0.71"
    Available Sizes
       Random Length (10"-12") - $6.58
       One Ft. (12") Length - Price : $7.31
       Two Ft. (24") Length - Price : $14.04
       Three Ft. (36") Length - Price : $19.74
       Four Ft. (48") Length - Price : $23.39
       Five Ft. (60") Length - Price : $27.79
       Six Ft. (72") Length - Price : $32.46
       Seven Ft. (84") Length - Price : $36.85
       Eight Ft. (96" Length) - Price : $40.94

    Technical Information

    Weight/Lineal Foot
    0.59 pounds
    Material Specifications

    This material meets the following specs:
    ASME SA312

    This material meets the following specs:
    ASTM A312

    Theoretical Bursting Pressure

    11607 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2901.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

     
    Chemistry Information: 304 Stainless
    Element Percentage
    C 0.08 max
    Cr 18 - 20
    Fe 66.345 - 74
    Mn 2 max
    Ni 8 - 10.5
    P 0.045 max
    S 0.03 max
    Si 1 max

    Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    0.75" NOM. (1.05" OD X 0.07" WALL X 0.92" ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (.75")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.75 pounds
    Dimension Name Value
    Nominal 0.75"
    OD 1.05"
    Wall Thickness 0.07"
    ID 0.92"
    Available Sizes
       Random Length (10"-12") - $6.74
       One Ft. (12") Length - Price : $7.49
       Two Ft. (24") Length - Price : $14.35
       Three Ft. (36") Length - Price : $20.21
       Four Ft. (48") Length - Price : $23.94
       Five Ft. (60") Length - Price : $28.44
       Six Ft. (72") Length - Price : $33.23
       Seven Ft. (84") Length - Price : $37.72
       Eight Ft. (96" Length) - Price : $41.90

    Technical Information

      Weight/Lineal Foot
      0.75 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      9286 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2321.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1" NOM. (1.32" OD X 0.07" WALL X 1.185" ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.95 pounds
    Dimension Name Value
    Nominal 1"
    OD 1.32"
    Wall Thickness 0.07"
    ID 1.185"
    Available Sizes
       Random Length (10"-12") - $5.67
       One Ft. (12") Length - Price : $6.29
       Two Ft. (24") Length - Price : $12.11
       Three Ft. (36") Length - Price : $17.01
       Four Ft. (48") Length - Price : $20.17
       Five Ft. (60") Length - Price : $23.93
       Six Ft. (72") Length - Price : $27.98
       Seven Ft. (84") Length - Price : $31.76
       Eight Ft. (96" Length) - Price : $35.28

    Technical Information

      Weight/Lineal Foot
      0.95 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      7414 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1853.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1.25" NOM. (1.66" OD X 0.07" WALL X 1.53" ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1.25")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.2043 pounds
    Dimension Name Value
    Nominal 1.25"
    OD 1.66"
    Wall Thickness 0.07"
    ID 1.53"
    Available Sizes
       Random Length (10"-12") - $7.85
       One Ft. (12") Length - Price : $8.74
       Two Ft. (24") Length - Price : $16.78
       Three Ft. (36") Length - Price : $23.58
       Four Ft. (48") Length - Price : $27.96
       Five Ft. (60") Length - Price : $33.19
       Six Ft. (72") Length - Price : $38.77
       Seven Ft. (84") Length - Price : $44.01
       Eight Ft. (96" Length) - Price : $48.89

    Technical Information

      Weight/Lineal Foot
      1.2043 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      5873 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1468.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    1.5" NOM. (1.9" OD X 0.06" WALL X 1.774" ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1.5")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.2 pounds
    Dimension Name Value
    Nominal 1.5"
    OD 1.9"
    Wall Thickness 0.06"
    ID 1.774"
    Available Sizes
       Random Length (10"-12") - $8.05
       One Ft. (12") Length - Price : $8.94
       Two Ft. (24") Length - Price : $17.16
       Three Ft. (36") Length - Price : $24.14
       Four Ft. (48") Length - Price : $28.61
       Five Ft. (60") Length - Price : $33.97
       Six Ft. (72") Length - Price : $39.69
       Seven Ft. (84") Length - Price : $45.06
       Eight Ft. (96" Length) - Price : $50.06

    Technical Information

      Weight/Lineal Foot
      1.2 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      5132 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1283 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2" NOM. (2.375" OD X .065" WALL X 2.245" ID) WELDED STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L 2" NOM. (2.375" OD x .065" WALL x 2.245" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.7496 pounds
    Dimension Name Value
    Nominal 2"
    OD 2.38"
    Wall Thickness 0.07"
    ID 2.245"
    Available Sizes
       Random Length (10"-12") - $12.98
       One Ft. (12") Length - Price : $14.41
       Two Ft. (24") Length - Price : $27.70
       Three Ft. (36") Length - Price : $38.93
       Four Ft. (48") Length - Price : $46.13
       Five Ft. (60") Length - Price : $54.79
       Six Ft. (72") Length - Price : $64.01
       Seven Ft. (84") Length - Price : $72.65
       Eight Ft. (96" Length) - Price : $80.75

    Technical Information

      Weight/Lineal Foot
      1.7496 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      4105 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1026.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2.5" (2.88" OD X 0.08" WALL X 2.709" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 2.5" (2.88" OD x 0.08" Wall x 2.709" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.4237 pounds
    Dimension Name Value
    Nominal 2.5"
    OD 2.88"
    Wall Thickness 0.08"
    ID 2.709"
    Available Sizes
       Random Length (10"-12") - $25.26
       One Ft. (12") Length - Price : $28.07
       Two Ft. (24") Length - Price : $53.90
       Three Ft. (36") Length - Price : $75.78
       Four Ft. (48") Length - Price : $89.84
       Five Ft. (60") Length - Price : $106.67
       Six Ft. (72") Length - Price : $112.17
       Seven Ft. (84") Length - Price : $127.32
       Eight Ft. (96" Length) - Price : $141.48

    Technical Information

      Weight/Lineal Foot
      2.4237 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      4330 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1082.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    3" (3.5" OD X 0.08" WALL X 3.344" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 3" (3.5" OD x 0.08" Wall x 3.344" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.97 pounds
    Dimension Name Value
    Nominal 3"
    OD 3.5"
    Wall Thickness 0.08"
    ID 3.344"
    Available Sizes
       Random Length (10"-12") - $20.03
       One Ft. (12") Length - Price : $22.27
       Two Ft. (24") Length - Price : $42.74
       Three Ft. (36") Length - Price : $60.08
       Four Ft. (48") Length - Price : $71.21
       Five Ft. (60") Length - Price : $84.57
       Six Ft. (72") Length - Price : $98.81
       Seven Ft. (84") Length - Price : $112.16
       Eight Ft. (96" Length) - Price : $124.62

    Technical Information

      Weight/Lineal Foot
      2.97 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      3557 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 889.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    4" (4.5" OD X 0.08" WALL X 4.334" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 4" (4.5" OD x 0.08" Wall x 4.334" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.


    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.8259 pounds
    Dimension Name Value
    Nominal 4"
    OD 4.5"
    Wall Thickness 0.08"
    ID 4.334"
    Available Sizes
       Random Length (10"-12") - $24.47
       One Ft. (12") Length - Price : $27.20
       Two Ft. (24") Length - Price : $52.21
       Three Ft. (36") Length - Price : $73.41
       Four Ft. (48") Length - Price : $87.02
       Five Ft. (60") Length - Price : $103.32
       Six Ft. (72") Length - Price : $108.66
       Seven Ft. (84") Length - Price : $123.35
       Eight Ft. (96" Length) - Price : $137.05

    Technical Information

      Weight/Lineal Foot
      3.8259 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      2767 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 691.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    SCHEDULE 5 STAINLESS STEEL PIPE T-304/304L View in MM

    Please note that any measurements in metric units are not guaranteed to be exact. The dimensions are provided in metric units for your convenience only. Click here for more information on our metric size policy.

    12.7 MM NOM. (21.34 MM OD X 1.78 MM WALL X 18.03 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (.5")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.59 pounds
    Dimension Name Value
    Nominal 12.7"
    OD 21.34"
    Wall Thickness 1.78"
    ID 18.03"
    Available Sizes
       Random Length (10"-12") - $6.58
       One Ft. (12") Length - Price : $7.31
       Two Ft. (24") Length - Price : $14.04
       Three Ft. (36") Length - Price : $19.74
       Four Ft. (48") Length - Price : $23.39
       Five Ft. (60") Length - Price : $27.79
       Six Ft. (72") Length - Price : $32.46
       Seven Ft. (84") Length - Price : $36.85
       Eight Ft. (96" Length) - Price : $40.94

    Technical Information

      Weight/Lineal Foot
      0.59 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      11607 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2901.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    19.05 MM NOM. (26.67 MM OD X 1.78 MM WALL X 23.37 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (.75")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.75 pounds
    Dimension Name Value
    Nominal 19.05"
    OD 26.67"
    Wall Thickness 1.78"
    ID 23.37"
    Available Sizes
       Random Length (10"-12") - $6.74
       One Ft. (12") Length - Price : $7.49
       Two Ft. (24") Length - Price : $14.35
       Three Ft. (36") Length - Price : $20.21
       Four Ft. (48") Length - Price : $23.94
       Five Ft. (60") Length - Price : $28.44
       Six Ft. (72") Length - Price : $33.23
       Seven Ft. (84") Length - Price : $37.72
       Eight Ft. (96" Length) - Price : $41.90

    Technical Information

      Weight/Lineal Foot
      0.75 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      9286 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 2321.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    25.4 MM NOM. (33.53 MM OD X 1.78 MM WALL X 30.1 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 0.95 pounds
    Dimension Name Value
    Nominal 25.4"
    OD 33.53"
    Wall Thickness 1.78"
    ID 30.1"
    Available Sizes
       Random Length (10"-12") - $5.67
       One Ft. (12") Length - Price : $6.29
       Two Ft. (24") Length - Price : $12.11
       Three Ft. (36") Length - Price : $17.01
       Four Ft. (48") Length - Price : $20.17
       Five Ft. (60") Length - Price : $23.93
       Six Ft. (72") Length - Price : $27.98
       Seven Ft. (84") Length - Price : $31.76
       Eight Ft. (96" Length) - Price : $35.28

    Technical Information

      Weight/Lineal Foot
      0.95 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      7414 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1853.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    31.75 MM NOM. (42.16 MM OD X 1.78 MM WALL X 38.86 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1.25")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.2043 pounds
    Dimension Name Value
    Nominal 31.75"
    OD 42.16"
    Wall Thickness 1.78"
    ID 38.86"
    Available Sizes
       Random Length (10"-12") - $7.85
       One Ft. (12") Length - Price : $8.74
       Two Ft. (24") Length - Price : $16.78
       Three Ft. (36") Length - Price : $23.58
       Four Ft. (48") Length - Price : $27.96
       Five Ft. (60") Length - Price : $33.19
       Six Ft. (72") Length - Price : $38.77
       Seven Ft. (84") Length - Price : $44.01
       Eight Ft. (96" Length) - Price : $48.89

    Technical Information

      Weight/Lineal Foot
      1.2043 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      5873 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1468.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    38.1 MM NOM. (48.26 MM OD X 1.52 MM WALL X 45.06 MM ID) STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L (1.5")  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.2 pounds
    Dimension Name Value
    Nominal 38.1"
    OD 48.26"
    Wall Thickness 1.52"
    ID 45.06"
    Available Sizes
       Random Length (10"-12") - $8.05
       One Ft. (12") Length - Price : $8.94
       Two Ft. (24") Length - Price : $17.16
       Three Ft. (36") Length - Price : $24.14
       Four Ft. (48") Length - Price : $28.61
       Five Ft. (60") Length - Price : $33.97
       Six Ft. (72") Length - Price : $39.69
       Seven Ft. (84") Length - Price : $45.06
       Eight Ft. (96" Length) - Price : $50.06

    Technical Information

      Weight/Lineal Foot
      1.2 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      5132 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1283 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2" NOM. (2.375" OD X .065" WALL X 2.245" ID) WELDED STAINLESS T-304/304L PIPE SCHEDULE 5

    Stainless Steel Pipe T-304/304L 2" NOM. (2.375" OD x .065" WALL x 2.245" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 1.7496 pounds
    Dimension Name Value
    Nominal 50.8"
    OD 60.45"
    Wall Thickness 1.78"
    ID 57.02"
    Available Sizes
       Random Length (10"-12") - $12.98
       One Ft. (12") Length - Price : $14.41
       Two Ft. (24") Length - Price : $27.70
       Three Ft. (36") Length - Price : $38.93
       Four Ft. (48") Length - Price : $46.13
       Five Ft. (60") Length - Price : $54.79
       Six Ft. (72") Length - Price : $64.01
       Seven Ft. (84") Length - Price : $72.65
       Eight Ft. (96" Length) - Price : $80.75

    Technical Information

      Weight/Lineal Foot
      1.7496 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      4105 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1026.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    2.5" (2.88" OD X 0.08" WALL X 2.709" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 2.5" (2.88" OD x 0.08" Wall x 2.709" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.4237 pounds
    Dimension Name Value
    Nominal 63.5"
    OD 73.15"
    Wall Thickness 2.03"
    ID 68.81"
    Available Sizes
       Random Length (10"-12") - $25.26
       One Ft. (12") Length - Price : $28.07
       Two Ft. (24") Length - Price : $53.90
       Three Ft. (36") Length - Price : $75.78
       Four Ft. (48") Length - Price : $89.84
       Five Ft. (60") Length - Price : $106.67
       Six Ft. (72") Length - Price : $112.17
       Seven Ft. (84") Length - Price : $127.32
       Eight Ft. (96" Length) - Price : $141.48

    Technical Information

      Weight/Lineal Foot
      2.4237 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      4330 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 1082.5 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    3" (3.5" OD X 0.08" WALL X 3.344" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 3" (3.5" OD x 0.08" Wall x 3.344" ID)  is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 2.97 pounds
    Dimension Name Value
    Nominal 76.2"
    OD 88.9"
    Wall Thickness 2.03"
    ID 84.94"
    Available Sizes
       Random Length (10"-12") - $20.03
       One Ft. (12") Length - Price : $22.27
       Two Ft. (24") Length - Price : $42.74
       Three Ft. (36") Length - Price : $60.08
       Four Ft. (48") Length - Price : $71.21
       Five Ft. (60") Length - Price : $84.57
       Six Ft. (72") Length - Price : $98.81
       Seven Ft. (84") Length - Price : $112.16
       Eight Ft. (96" Length) - Price : $124.62

    Technical Information

      Weight/Lineal Foot
      2.97 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      3557 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 889.25 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    4" (4.5" OD X 0.08" WALL X 4.334" ID) SCHEDULE 5 304-304L WELDED STAINLESS PIPE

    Stainless Steel Pipe T-304/304L 4" (4.5" OD x 0.08" Wall x 4.334" ID) is an excellent choice for its tensile strength, high resistance to corrosion, and temperature resistance. With the ability to be sterilized, 304/304L stainless steel pipe is a cost-effective choice for most applications such as moving liquids and gases in temperate and corrosive conditions.

    Material Meets These Standard(s):  ASME SA312, ASTM A312

    DIMENSIONS Weight/Lineal Foot: 3.8259 pounds
    Dimension Name Value
    Nominal 101.6"
    OD 114.3"
    Wall Thickness 2.03"
    ID 110.08"
    Available Sizes
       Random Length (10"-12") - $24.47
       One Ft. (12") Length - Price : $27.20
       Two Ft. (24") Length - Price : $52.21
       Three Ft. (36") Length - Price : $73.41
       Four Ft. (48") Length - Price : $87.02
       Five Ft. (60") Length - Price : $103.32
       Six Ft. (72") Length - Price : $108.66
       Seven Ft. (84") Length - Price : $123.35
       Eight Ft. (96" Length) - Price : $137.05

    Technical Information

      Weight/Lineal Foot
      3.8259 pounds
      Material Specifications

      This material meets the following specs:
      ASME SA312

      This material meets the following specs:
      ASTM A312

      Theoretical Bursting Pressure

      2767 lbs/sq inch. ASME Code suggests a safety factor of 4 - use 691.75 PSI Burst pressure based on temps between -20° F and 100° F. These are typical/average values and are not a guarantee of maximum or minimum values

       
      Chemistry Information: 304 Stainless
      Element Percentage
      C 0.08 max
      Cr 18 - 20
      Fe 66.345 - 74
      Mn 2 max
      Ni 8 - 10.5
      P 0.045 max
      S 0.03 max
      Si 1 max

      Please note that this data is to be used ONLY FOR REFERENCE, NOT FOR DESIGN, and by using it, you agree that any decisions you make regarding materials for your project are at your own discretion.

    304 / 304L STAINLESS STEEL PIPE

    These grades of austenitic stainless steels are the most versatile and widely used stainless steels. They exhibit excellent corrosion resistance to a wide range of corrosive environments. Type 304 and 304L grades of stainless steel pipe exhibit good machinability and have excellent weld-ability characteristics with or without the addition of filler metals.

    SHOP 304 / 304L STAINLESS STEEL PIPE

    Stock Size Range and Specifications:

    Seamless product

    MPS:1/8" through 24" Schedules:5, 10, 10S, 20, 30, 40, 40S, 80, 80S

    Specifications: ASTM A312, ASME SA312

    Welded product

    NPS:1/8" through 12" Schedules:5, 10, 40, 80, 160, XXH

    Specifications: ASTM A312,ASME SA312

    Corrosion tested to MIL-P-24691/3 or A262 Practice E

    Typical Chemical Composition % (max values, unless noted)
    Weight % C Mn P S Si Cr Ni
    304 .08 2.00 .045 .030 1.00 18.0-20.0 8.0-11.0
    304L .035 2.00 .045 .030 1.00 18.0-20.0 8.0-13.0
    Typical Mechanical Properties
    Grade Tensile
      Ultimate/Min Yield/Min Elongation/Min
      KSI MPA KSI MPA %
    304 75 515 30 205 35
    304L 70 485 25 170 35

     

    Ansi Pipe Schedule - Sch 5 to Sch 60

    ANSI Pipe Chart

    A complete listing of ANSI pipe schedules.

    • Wall thicknesses are listed in blue
    • Weight per foot is listed in black
    All measurements are standard/ empirical (inches and pounds) unless otherwise noted.
    Pipe Size O.D. Inches 5s TRUE 5 10s TRUE 10 20 30 40s & STD TRUE 40 60
    1/8 0.405 0.35 0.049 0.049     0.068 0.068
    0.1383 0.1863 0.1863     0.2447 0.2447
    1/4 0.54 0.049 0.065 0.065     0.088 0.088
    0.257 0.3297 0.3297     0.4248 0.4248
    3/8 0.675 0.049 0.065 0.065     0.091 0.091
    0.3276 0.4235 0.4235     0.5676 0.5676
    1/2 0.84 0.065 0.065 0.083 0.083     0.109 0.109
    0.5383 0.5383 0.671 0.671     0.851 0.851
    3/4 1.05 0.065 0.065 0.083 0.083     0.113 0.113
    0.6838 0.6838 0.8572 0.8572     1.131 1.131
    1 1.315 0.065 0.065 0.109 0.19     0.133 0.133
    0.8678 0.8678 1.404 1.404     1.679 1.679
    1 1/4 1.66 0.065 0.065 0.109 0.109     0.14 0.14
    1.107 1.107 1.806 1.806     2.273 2.273
    1 1/2 1.9 0.065 0.065 0.109 0.109     0.145 0.145
    1.274 1.274 2.638 2.638     2.718 2.718
    2 2.375 0.065 0.065 0.109 0.109     0.154 0.154
    1.604 1.604 2.638 2.638     3.653 3.653
    2 1/2 2.875 0.083 0.083 0.12 0.12     0.203 0.203
    2.475 2.475 3.531 3.531     5.793 5.793
    3 3.5 0.083 0.083 0.12 0.12     0.216 0.216
    3.029 3.029 4.332 4.332     7.576 7.576
    3 1/2 4 0.083 0.083 0.12 0.12     0.226 0.226
    3.472 3.472 4.97 4.97     9.109 9.109
    4 4.5 0.083 0.083 0.12 0.12     0.237 0.237 0.281
    3.915 3.915 5.613 5.613     10.79 10.79 12.66
    4 1/2 5 0.247
    12.53
    5 5.563 0.109 0.109 0.134 0.134     0.258 0.258
    6.349 6.349 7.77 7.77     14.62 14.62
    6 6.625 0.109 0.109 0.134 0.134     0.28 0.28
    7.585 7.585 9.289 9.289     18.97 18.97
    7 7.625 0.301
    23.57
    8 8.625 0.109 0.109 0.148 0.148 0.25 0.277 0.322 0.322 0.406
    9.914 9.914 13.4 13.4 22.36 24.7 28.55 28.55 35.64
    9 9.625 0.342
    33.9
    10 10.75 0.134 0.134 0.165 0.165 0.25 0.307 0.365 0.365 0.5
    15.19 15.19 18.65 18.65 28.04 34.24 40.48 40.48 54.74
    11 11.75 0.375
    45.55
    12 12.75 0.156 0.165 0.18 0.18 0.25 0.33 0.375 0.406 0.562
    21.07 22.18 24.2 24.2 33.38 43.77 49.56 53.53 73.16
    14 14 0.156   0.188 0.25 0.312 0.375 0.375 0.437 0.593
    23.06   27.73 36.71 45.68 54.57 54.57 63.67 84.91
    16 16 0.165   0.188 0.25 0.312 0.375 0.375 0.5 0.656
    27.9   31.75 42.05 52.36 62.58 62.58 82.77 107.5
    18 18 0.165   0.188 0.25 0.312 0.437 0.375 0.562 0.75
    31.43   35.76 47.39 59.03 82.06 70.59 104.8 138.2
    20 20 0.188   0.218 0.25 0.375 0.5 0.375 0.593 0.812
    39.78   46.05 52.73 78.6 104.1 78.6 122.9 166.4
    24 24 0.218   0.25 0.25 0.375 0.562 0.375 0.687 0.968
    55.37   63.41 63.41 94.62 140.8 94.62 171.2 238.1
    26 26 0.312 0.5   0.375
    85.6 136.2   102.6
    28 28 0.312 0.5 0.625 0.375
    92.26 146.8 182.7 110.6
    30 30 0.25   0.312 0.312 0.5 0.625 0.375
    79.43   98.93 98.93 157.5 196.1 118.6
    32 32 0.312 0.5 0.625 0.375 0.688
    105.6 168.2 209.4 126.7 230.1
    34 34 0.312 0.5 0.625 0.375 0.688
    112.3 178.9 222.8 134.7 244.8
    36 36 0.312   0.625 0.375 0.75
    118.9   236.1 142.7 282.3
    40 40 0.375
    158.7
    42 42 0.375
    166.7
    48 48 0.375
    190.7

    Ansi Pipe Schedule - Over Sch 60

    All measurements are standard/ empirical (inches and pounds) unless otherwise noted.
    Pipe Size O.D. Inches 80s & XH TRUE 80 100 120 140 160 XXH
    1/8 0.405 0.095 0.095
    0.3145 0.3145
    1/4 0.54 0.119 0.119
    0.5351
    3/8 0.675 0.126 0.126
    0.7388
    1/2 0.84 0.147 0.147       0.187 0.294
    1.088 1.088       1.304 1.714
    3/4 1.05 0.154 0.154       0.218 0.308
    1.474 1.474       1.937 2.441
    1 1.315 0.179 0.179       0.25 0.358
    2.172 2.172       2.844 3.659
    4-Nov 1.66 0.191 0.191       0.25 0.382
    2.997 2.997       3.765 5.214
    1 1/2 1.9 0.2 0.2       0.281 0.4
    3.631 3.631       4.859 6.408
    2 2.375 0.218 0.218       0.344 0.436
    5.022 5.022       7.462 9.029
    2 1/2 2.875 0.276 0.276       0.375 0.552
    7.661 7.661       10.01 13.7
    3 3.5 0.3 0.3       0.437 0.6
    10.25 10.25       14.32 18.58
    3 1/2 4 0.318 0.318         0.636
    12.51 12.51         22.85
    4 4.5 0.337 0.337   0.437   0.531 0.674
    14.98 14.98   19.01   22.51 27.54
    4 1/2 5 0.355           0.71
    17.61           32.53
    5 5.563 0.375 0.375   0.5   0.625 0.75
    20.78 20.78   27.04   32.96 38.55
    6 6.625 0.432 0.432   0.562   0.718 0.864
    28.57 28.57   36.39   45.3 53.16
    7 7.625 0.5           0.875
    38.05           62.08
    8 8.625 0.5 0.5 0.593 0.718 0.812 0.906 0.875
    43.39 43.39 50.87 60.63 67.76 74.69 72.42
    9 9.625 0.5
    48.72
    10 10.75 0.5 0.593 0.718 0.843 1 1.125
    54.74 64.33 76.93 89.2 104.1 115.7
    11 11.75 0.5
    60.07
    12 12.75 0.5 0.687 0.843 1 1.125 1.312
    65.42 88.51 107.2 125.5 139.7 160.3
    14 14 0.5 0.75 0.937 1.093 1.25 1.406
    72.09 106.1 130.7 150.7 170.2 189.1
    16 16 0.5 0.843 1.031 1.218 1.437 1.593
    82.77 136.5 164.8 192.3 223.5 245.1
    18 18 0.5 0.937 1.156 1.375 1.562 1.781
    93.45 170.8 208 244.1 274.2 308.5
    20 20 0.5 1.031 1.281 1.5 1.75 1.968
    104.1 208.9 256.1 296.4 341.1 379
    24 24 0.5 1.218 1.531 1.812 2.062 2.343
    125.5 296.4 367.4 429.4 483.1 541.9
    26 26 0.5
    136.2
    28 28
    30 30 0.5
    157.5
    32 32 0.5
    168.2
    34 34
    36 36 0.5
    189.6
    40 40 0.5
    210.9
    42 42 0.5
    221.6
    48 48 0.5
    253.6

    Compleate Information About stainless steel seamless pipe dimensions, seamless pipe sizes, seamless pipe specification, seamless pipe standards, seamless tube sizes, seamless pipe, seamless pipe manufacturer in india, seamless pipe manufacturer in europe, seamless pipe hs code, seamless pipe manufacturer in china, seamless pipes and tubes, seamless pipe chart, seamless pipe china, seamless pipe weight chart, seamless pipe manufacturer china, seamless pipe distributor, seamless pipe import data zauba, seamless pipe fittings, seamless tube hs code, seamless pipe india, seamless pipe manufacturer in japan, seamless pipe manufacturer in malaysia, seamless pipe manufacturer in korea, seamless pipe suppliers in dubai, seamless pipe supplier in malaysia, seamless pipe importers, seamless pipe manufacturers, seamless pipe malaysia, seamless pipe manufacturing process, seamless pipe mills, pipe seamless or welded, seamless pipe pressure rating, seamless pipe price, seamless pipe suppliers, seamless pipe schedule, seamless pipe singapore, seamless tube suppliers, seamless pipes & tubes, seamless tube tolerances, seamless pipe us, seamless tube uk, seamless pipe weight.

    Stainless Steel Pipes Specifications

    ASTM A312: Seamless and straight-seam welded austenitic pipe intended for high temperature and general corrosive service. Filler metal not permitted during welding.

    ASTM A358: Electric fusion welded austenitic pipe for corrosive and/or high temperature service. Typically only pipe up to 8 inch is produced to this specification. Addition of filler metal is permitted during welding.

    ASTM A790: Seamless and straight-seam welded ferritic/austenitic (duplex) pipe intended for general corrosive service, with a particular emphasis on resistance to stress corrosion cracking.

    ASTM A409: Straight-seam or spiral-seam electric fusion welded large diameter austenitic light-wall pipe in sizes 14” to 30” with walls Sch5S and Sch 10S for corrosive and/or high

    ASTM A376: Seamless austenitic pipe for high temperature applications.

    ASTM A813: Single-seam, single- or double- welded austenitic pipe for high temperature and general corrosive applications.

    ASTM A814: Cold-worked welded austenitic pipe for high temperature and general corrosive service.

    CLICK HERE FOR WEIGHT FORMULA & WEIGHT CALCULATOR : Pipe Weight Formula In Kg | Plate Weight Formula Metric | Sheet Weight Formula | Tube Weight Formula | Aluminium Weight Formula Kg | Flat Bar Weight Calculator, Stainless Steel Sheet Weight Calculation Formula, Formula for Calculating SS Pipe Weight, Formula for Calculating SS Bar Weight, Formula for Calculating SS Square Bar Weight, Formula for Calculating SS Hexagonal Bar Weight, Formula for Calculating SS Flat Bar Weight, Formula for Calculating SS Sheet & Plates Weight, Formula for Calculating SS Circle Weight, Formula for Calculating Brass Pipe/ Copper Pipe Weight, Formula for Calculating Lead Pipe Weight, Formula for Calculating Aluminium Pipe Weight, Formula for Calculating Aluminium Sheet Weight, STEEL PIPE WEIGHT CALCULATOR, STAINLESS STEEL PIPE WEIGHT CALCULATOR


    ASTM A312 Stainless Steel Pipe Price List in India


    If you don’t see what you’re looking for just call one of our team members at +91-22-6659 5285 Or Mail Us inquiry@raajsagarsteels.com. No inquiry is too large or too small, we specialize in locating hard to find items. If you do see what you are looking, we would love to assist you and give you a quote today!

    24 Hrs. Online Whatsapp Number   Contact Person: Mr. Milap Mehta - Cell: +91-9869 532 584

    Our Overseas Sales Distributors

    India, United Arab Emirates, Kenya, Qatar, USA, Malaysia, South Korea, Indonesia, Singapore, UK, Bangladesh, Japan, China, Thailand, Taiwan, Italy, Iran, Vietnam, Poland, Egypt, Canada, Turkey, Sri Lanka, Pakistan, Saudi Arabia, Kuwait, Russia, Nigeria, France, Denmark, Germany, Greece, Ukraine, Oman, Switzerland, South Africa, Romania, Colombia, Iraq, Australia, Netherlands, Portugal, Spain, Brazil, Norway, Paraguay, Azerbaijan, Trinidad & Tobago, Mexico, Hong Kong, Philippines, Tunisia, Bahrain, Serbia, Belarus, Houston Tx, Salt Lake City, Texas Tx, Billings Mt, Denver, San Antonio, Pittsburgh Pa, Columbus Ohio, Alberta, Aberdeen, Adelaide, Brisbane, Beaumont Tx, Bristol, Baton Rouge, Birmingham, Baltimore Md, Belfast, Bradford, Calgary, Cape Town, California, Chicago, Chennai, Dublin, Durban, Dallas Tx, Dubai, Doncaster, Derby, Dundee, Dandenong, Edmonton, Europe, Edinburgh, Eugene Or, Exeter, Estevan, Edmonton, Eugene Oregon, Fort Mcmurray, Fresno Ca, Florida, Fargo Nd, Mumbai, Chennai, Gauteng, Glasgow, Greensboro Nc, Greenville Sc, Great Yarmouth, Gloucester, Georgia

    Gold Coast, Guildford, Hamilton, Halifax, Hawaii, Huntingdon, Horsham, Holland, Hereford, Hull, Dubai, Pune, Johannesburg, Jacksonville Fl, Jackson Ms, Jacksonville Fl, Jonesboro Ar, Jackson Tn, Joliet Il Illinois , Joplin Mo Missouri , Kansas City, Kamloops, Kelowna, Knoxville Tn Tennessee, Kuala Lumpur, Missouri, Knoxville Tn, London, Leeds, Liverpool, Los Angeles, Las Vegas, Lancaster Pa, Louisiana, Melbourne, Massachusetts, Manchester, Medford Oregon, Michigan, Middlesbrough, Mississauga, Minnesota, New Jersey, Northern Ireland, Newcastle, Newark (Nj), Nashville Tn, Newfoundland, North Carolina Nc, Nashville, Ontario, Oregon, Ottawa, Okc Oklahoma, Ohio, Oklahoma, Oxford, Ogden Utah, Orlando Fl, Perth, Port Elizabeth, Queensland, Rochester Ny, Richmond Va, Rathcoole, Red Deer Alberta, Reno, Regina, Seattle Wa, Sydney, Saskatoon, Scotland, San Diego, Southampton, Tulsa Ok, Toronto, Tucson, Townsville, Tulsa, Teesside, Tacoma Wa, Tampa, Toowoomba, Utah, Usa, Utah, Vancouver, Victoria Bc, Ventura Ca, Victoria Tx, Washington State, Witbank, West Midlands, Wichita Ks, Winnipeg, Warrington, Washington Pa, Williston Nd, Yuma Az, York Pa, Youngstown Ohio, New York, Buffalo New York, Zambia, New Zealand Nz

    Dealer,Distributor & Suppliers of Top 10 Manufacturers of Stainless Steel Pipes
    Nippon Steel & Sumitomo Metals (NSSMC)
    Nippon Steel Pipes & Tubes
    Schoeller Bleckmann
    Schoeller Bleckmann Steel Pipes & Tubes
    SANYO Special Steel
    Sanyo Special Steel Pipes & Tubes
    Kobe Steel
    Kobe Stainless Steel Pipes & Tubes
    Valourec & Mannesman -v&m
    Salzgitter Mannesmann Stainless Tubes
    Salzgitter Mannesmann Stainless Tubes
    Wuxi
    Tubacex Innovative Steel Tube Solutions
    Tubacex Steel Tubes
     

    stainless steel pipe schedule 5 pressure rating, stainless steel pipe schedule 5 dimensions, stainless steel pipe schedule 5 weight, stainless steel pipe schedule 50, stainless steel pipe schedule 5 price, 316 stainless steel pipe schedule 5, stainless steel pipe 316l schedule 5s, stainless steel schedule 5 pipe fittings, schedule 5 stainless steel pipe welding, 10 inch schedule 40 stainless steel pipe, 12 inch schedule 5 stainless steel pipe, schedule 5 stainless steel pipe mm, schedule 5 stainless steel pipe dimensions metric, maximum pressure schedule 5 stainless steel pipe, pressure rating of stainless steel pipe schedule 5, schedule 5 stainless steel pipe od, weight of schedule 5 stainless steel pipe

    schedule 5 stainless steel pipe fittings dimensions, stainless steel pipe schedule 5, schedule 5 stainless steel pipe support spacing, schedule 5 stainless steel pipe bends, schedule 5 stainless steel pipe burst pressure, schedule 5 stainless steel pipe chart, schedule 5 stainless steel pipe cost, schedule 5 stainless steel pipe pressure rating chart, 6 schedule 5 stainless steel pipe dimensions
    2 schedule 5 stainless steel pipe dimensions, 304l schedule 5 stainless steel pipe dimensions, schedule 5 316l stainless steel pipe dimensions, 6 inch schedule 5 stainless steel pipe dimensions, schedule 5 stainless steel pipe elbows, pressure rating for stainless steel pipe schedule 5, schedule 5 stainless steel pipe friction loss, schedule 5 stainless steel pipe weight per foot, schedule 5 stainless steel grooved pipe, schedule 5 stainless steel pipe id, what is schedule 5 stainless steel pipe, 20 inch schedule 5 stainless steel pipe, 5 inch schedule 5 stainless steel pipe

    We Export to: We Import to:

    People Also Search :